Establishment of Numerical Wave Flume Based on the Second-Order Wave-Maker Theory     

Zhang  Hao-chen  Liu  Shu-xue  Li  Jin-xuan  Wang  Lei 《中国海洋工程》2019,33(2):160-171

With growing computational power, the first-order wave-maker theory has become well established and is widely used for numerical wave flumes. However, existing numerical models based on the first-order wave-maker theory lose accuracy as nonlinear effects become prominent. Because spurious harmonic waves and primary waves have different propagation velocities, waves simulated by using the first-order wave-maker theory have an unstable wave profile. In this paper, a numerical wave flume with a piston-type wave-maker based on the second-order wave-maker theory has been established. Dynamic mesh technique was developed. The boundary treatment for irregular wave simulation was specially dealt with. Comparisons of the free-surface elevations using the first-order and second-order wave-maker theory prove that second-order wave-maker theory can generate stable wave profiles in both the spatial and time domains. Harmonic analysis and spectral analysis were used to prove the superiority of the second-order wave-maker theory from other two aspects. To simulate irregular waves, the numerical flume was improved to solve the problem of the water depth variation due to low-frequency motion of the wave board. In summary, the new numerical flume using the second-order wave-maker theory can guarantee the accuracy of waves by adding an extra motion of the wave board. The boundary treatment method can provide a reference for the improvement of nonlinear numerical flume.  相似文献   

江苏海岸中部近岸冬季潮汐和潮流特征     

王逸涵  王韫玮  于谦  蔡辉  高抒 《海洋科学》2019,43(10):66-74

南黄海西侧的江苏海岸近岸区域,素以地形复杂、潮流强劲、悬沙输运剧烈著称,但是较长期的同步潮位和潮流观测数据仍然缺乏,尤其是在近岸(20 km)浅水(20 m)区域。2014年1月在大丰港附近开展了连续潮位和潮流观测,获得的数据揭示了一系列特征。此地潮汐潮流为正规半日潮,浅水分潮显著。平均潮差为3.05 m,最显著的两个分潮为M2和S2分潮,振幅分别为1.45 m和0.52 m。潮流最显著的半日分潮M2分潮和最显著的浅水分潮M4分潮在沿岸方向上振幅分别为0.84m/s和0.12m/s,在跨岸方向上振幅分别为0.24 m/s和0.01 m/s,沿岸方向占绝对优势。潮波的沿岸传播介于前进波和驻波之间,驻波的特征稍强。M2分潮潮流椭圆最大流(长轴)方向为南偏东7.4°。存在冬季沿岸向北的余流,垂向平均值的大小为2.2 cm/s。以上潮汐潮流特征为该区域海洋物质输运研究提供了基础资料。  相似文献   

X波段雷达海面回波谱宽特征研究     

纪立佳  张彦敏  王运华  徐延东 《海洋学报》2019,41(7):149-158

海面电磁回波频谱宽度与海浪波高密切相关，可应用频谱宽度进行海浪有效波高反演。本文应用线性滤波法仿真出了海表散射面元在雷达视向上的投影速度，建立了回波谱宽模型，分析了雷达空间分辨率、回波时间序列长度及海洋环境参数等因素对频谱宽度的影响，同时还针对如何在实际观测过程中选择回波时间序列长度、观测方位角等参数进行了讨论。最后还将理论结果与CSIR-X波段雷达实测数据谱宽估计结果进行了比较。结果表明，剔除雷达噪声以及频率泄露的影响后，基于高斯分布标准偏差的谱宽估计方法所得结果与理论结果吻合很好，这从而证明了理论结果的可靠性。本文所得结果对海浪有效波高反演具有一定参考价值。  相似文献   

印尼贯穿流源区马鲁古海与哈马黑拉海水团来源的季节和年际变化   总被引：2，自引：1，他引：1  

王露  周磊  谢玲玲  郑全安  李强  李明明 《海洋学报(英文版)》2019,38(4):58-71

So far, large uncertainties of the Indonesian throughflow(ITF) reside in the eastern Indonesian seas, such as the Maluku Sea and the Halmahera Sea. In this study, the water sources of the Maluku Sea and the Halmahera Sea are diagnosed at seasonal and interannual timescales and at different vertical layers, using the state-of-the-art simulations of the Ocean General Circulation Model(OGCM) for Earth Simulator(OFES). Asian monsoon leaves clear seasonal footprints on the eastern Indonesian seas. Consequently, the subsurface waters(around 24.5σ_θ and at ～150 m) in both the Maluku Sea and the Halmahera Sea stem from the South Pacific(SP) during winter monsoon, but during summer monsoon the Maluku Sea is from the North Pacific(NP), and the Halmahera Sea is a mixture of waters originating from the NP and the SP. The monsoon impact decreases with depth, so that in the Maluku Sea, the intermediate water(around 26.8σ_θ and at ～480 m) is always from the northern Banda Sea and the Halmahera Sea water is mainly from the SP in winter and the Banda Sea in summer. The deep waters(around27.2σ_θ and at ～1 040 m) in both seas are from the SP, with weak seasonal variability. At the interannual timescale,the subsurface water in the Maluku Sea originates from the NP/SP during El Ni?o/La Ni?a, while the subsurface water in the Halmahera Sea always originates from the SP. Similar to the seasonal variability, the intermediate water in Maluku Sea mainly comes from the Banda Sea and the Halmahera Sea always originates from the SP. The deep waters in both seas are from the SP. Our findings are helpful for drawing a comprehensive picture of the water properties in the Indonesian seas and will contribute to a better understanding of the ocean-atmosphere interaction over the maritime continent.  相似文献   

碳氮稳定同位素比值在潮间带大型底栖动物组织间差异性研究   总被引：1，自引：1，他引：0  

刘博  陈琳琳  李宝泉  侯西勇  冯光海  李晓炜  李秉钧  王玉珏 《海洋学报》2019,41(4):74-82

近年来，稳定同位素技术已被广泛应用于食物网研究中。然而，生物样品取样部位对食物网构建的影响的研究相对少见。大型底栖动物作为潮间带食物网的重要组成部分，在食物网研究中有必要对其采样部位进行统一，以增加研究结果的准确性及可比较性。本研究选取黄河三角洲和烟台潮间带10种代表性的大型底栖动物，比较δ13C和δ15N在不同采样部位中的差异。结果显示，对于大多数底栖动物而言，采样部位将直接影响到δ13C和δ15N的测定结果。当底栖动物作为摄食者，需分析其食性和营养级时，应统一采用肌肉组织，如贝类的闭壳肌或足部肌肉，蟹类的鳌足肌肉，鱼类的背部肌肉；当底栖动物作为被摄食者，需分析次级消费者的食性和营养级时，除多毛类采用去除消化道内容物的体壁外，其他种类应选取整体（难以被消化的组织除外），如贝类的软体部，蟹类肌肉与鳃等的混合组织。  相似文献   

基于级配方程的粗粒料压实特性试验研究     

吴二鲁  朱俊高  郭万里  陆阳洋 《岩土力学》2020,41(1):214-220

级配显著影响着堆石料的压实特性，定量表述级配对堆石料压实特性的影响至关重要。基于连续级配土的级配方程，设计了16组不同级配的试验粗粒料，进行了表面振动压实试验和侧限压缩试验，定量研究了级配对粗粒料压实特性的影响。研究表明：由表面振动压实（动应力）试验和侧限压缩（静应力）试验得到的干密度与级配曲线面积之间均呈二次函数关系，且干密度中的最大值对应的级配曲线面积均在0.9附近；无论是表面振动压实试验还是侧限压缩试验，堆石料都存在干密度最优（最大）的级配。依据试验成果，给出了所试验堆石料的最优级配区间（级配上、下包络线）；同时，利用相似级配法论证了实际级配粗粒料的最优级配区间，并根据国内外多座土石坝粗粒料的设计级配验证了该最优级配区间的普遍适用性，为土石坝粗粒料的级配设计提供了理论依据。  相似文献   

内蒙古别鲁乌图铜多金属矿床锆石U-Pb年龄和S、Pb同位素特征及其地质意义     

郭硕  何鹏  刘洋  滕飞  胡晓佳  王文龙  杨泽黎 《现代地质》2020,(1):40-50

为了明确内蒙古别鲁乌图铜多金属矿床的成矿年龄与矿床成因,对该矿床中与成矿关系密切的流纹岩进行了锆石U-Pb年龄以及主要金属硫化物的S、Pb同位素测试。其中流纹岩的锆石206Pb/238U加权平均年龄为(271.7±1.6)Ma(MSWD=1.02),显示成矿作用发生于二叠纪。金属硫化物的S同位素分析结果显示δ34SV-CDT值分布在-0.6‰~1.0‰之间,平均为0.49‰,变化范围较窄,显示S的来源单一;Pb同位素组成比较集中,206Pb/204Pb为18.207~18.674,207Pb/204Pb为15.620~15.699,208Pb/204Pb为38.144~38.790,具有壳幔混源的特征。S、Pb同位素特征均指示成矿物质主要来源于岩浆热液。结合区域地质、矿床地质、空间分带等特征以及S、Pb同位素组成可知,别鲁乌图铜多金属矿床为VHMS型矿床,形成于二叠纪陆缘弧裂谷中。  相似文献   

硅灰加固宁波软土的试验研究     

王泽平  王常明  江南  张在恒 《岩土工程技术》2020,(2):111-116,121

为探索硅灰对软土的力学性质的影响,以宁波鄞州地区一种淤泥质黏土为试样,掺入不同量的硅灰,对硅灰加固土的力学性质和结构特征进行了测试。采用三轴不固结不排水剪切试验,测试分析了不同掺入量的硅灰加固土的应力应变关系,通过扫描电镜SEM照片分析了不同硅灰掺入量的硅灰加固土的结构特征。结果表明:(1)硅灰可以提高软土的黏聚力,黏聚力随着硅灰掺入量的增加而增大;(2)随着硅灰掺入量的增加,硅灰加固土的抗变形能力呈先增加后减小的趋势;(3)同一围压条件下,随着硅灰掺入量的增加,硅灰加固土的破坏偏应力逐渐增加;(4)随着硅灰掺入量的增加,硅灰加固土中大孔隙逐渐减少,小孔隙逐渐数量增加,孔径<1μm的小孔隙组分逐渐占优。  相似文献   

Tectonic nature of the NE Asian continental margin during the Late Jurassic–Early Cretaceous: constraints from the geochronology and geochemistry of igneous rocks in the NE North China Craton     

Xiao-Ming Zhang  Chen-Yang Sun  Feng Wang  Yu Li 《International Geology Review》2020,62(15):1949-1970

ABSTRACT

This paper presents geochronological, geochemical, and zircon Hf–O isotope data for late Mesozoic intrusive rocks from the northeastern North China Craton (NCC), with the aim of constraining the late Mesozoic tectonic nature of the NE Asian continental margin. U–Pb zircon data indicate that the Late Mesozoic magmatism in the northeastern NCC can be subdivided into two stages: Late Jurassic (161 ? 156 Ma) and Early Cretaceous (125 ? 120 Ma). Late Jurassic magmatism consists mainly of monzogranites. These monzogranites display high Sr/Y ratios and the tetrad effect in their REE, respectively, and have negative ε_Hf(t) values (?22.6 to ?15.8). The former indicates that the primary magma was generated by partial melting of thickened NCC lower crust, the latter suggests that the monzogranites were crystallized from highly fractionated magma, with the primary magma derived from partial melting of lower continental crust. Combined with the spatial distribution and rock associations of the Late Jurassic granitoids, we conclude that the Late Jurassic magmatism in the eastern NCC formed in a compressional environment related to oblique subduction of the Paleo-Pacific Plate beneath the Eurasia. The Early Cretaceous magmatism consists mainly of granitoids and quartz diorites. The quartz diorites formed by mixing of melts derived from the mantle and lower crust. The coeval granitoids are classified as high-K calc-alkaline and metaluminous to weakly peraluminous series. Some of the granitoids are similar to A-type granites. The granitoid ε_Hf(t) values and T_DM2 range from ?14.3 to ?1.4 and 2089 to 1274 Ma, respectively. These values indicate that their primary magma was derived from partial melting of lower crustal material of the NCC, but with a contribution of mantle-derived material. We therefore conclude that Early Cretaceous magmatism in the northeastern NCC occurred in an extensional environment related to westward subduction of the Paleo-Pacific Plate beneath Eurasia.  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献